Fingerboard Glow in the dark heat transfer - BRUH Manufacturing
Click to enlarge
Fingerboard Glow in the dark heat transfer - BRUH Manufacturing
Prev
Fingerboard Holographic Foil Heat Transfer - BRUH Manufacturing
Holographic Foil Fingerboard Heat Transfer
$15.00
Go to Shop
Next
100-Pack Skateboard Deck Shrink Wrap Bag Sleeve - BRUH Manufacturing
100-Pack Skateboard Deck Shrink Wrap Bag Sleeve
$49.00$69.00

$15.00

Glow-in-the-Dark Fingerboard Heat Transfer

Make your fingerboard graphics glow. This 30-sheet pack gives you a photoluminescent background layer for any clear real wear heat transfer graphic — charge it under normal light for a few minutes (sunlight or a lamp works best) and it glows in the dark, brightest right after charging and rechargeable any number of times.

Use it behind your artwork as a background: the glow shows through and around your graphic for an effect no standard transfer can match. Perfect for night-session edits, glow-themed setups, and brands that want a graphic people remember.

Each 40×110mm sheet is made to the ideal thickness for fingerboard application — no wrinkles, no lifting edges — and heat-bonds into the deck surface, so it wears like a standard real wear graphic instead of peeling off.

Pack: 30 sheets, 40×110mm. Press settings: https://www.bruhmfg.com/how-to-apply-fingerboard-heat-transfer/

Category: Tag:
Description

Description

How to Apply

Cut the graphic to size and position it graphic-side-down on a clean, dust-free deck, securing one edge with heat-resistant tape. Press at around 200°C (400°F) with firm, even pressure — a craft iron or heat gun works for fingerboards — keeping the heat moving, never lingering on one spot. Let the deck cool briefly, then peel the carrier film away slowly with tweezers. Always test on a spare deck first: every heat tool behaves differently, and one test graphic is cheaper than a ruined run.

Full walkthrough: https://www.bruhmfg.com/how-to-apply-fingerboard-heat-transfer/

Ships worldwide from our Fuzhou factory · Standard turnaround 5–7 days · 48-hour rush available · Every batch QC-checked before packing

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Glow-in-the-Dark Fingerboard Heat Transfer”

Your email address will not be published. Required fields are marked *

Captcha loading...

Related Products

    Holographic Silver Foil Heat Transfer - BRUH Manufacturing
    Select options
    Quick view

    Holographic Silver Foil Heat Transfer

     $5.00

    Stunning looking effect for your skateboard designs.

    Select options
    Fingerboard Silver Foil Heat Transfer - BRUH Manufacturing
    Add to cart
    Quick view

    Silver Foil Fingerboard Heat Transfer

     $12.00

    A clean silver mirror background for your fingerboard graphics. This 30-sheet pack layers behind any clear real wear heat transfer graphic, giving your artwork a bright reflective silver backdrop with a sharp, modern look.

    Silver foil works with almost any artwork style — from minimal line work to full-color graphics — and is a favorite for clean, technical deck designs where the background should add shine without stealing the show.

    Each 40×110mm sheet is made to the ideal thickness for fingerboard application — no wrinkles, no lifting edges — and heat-bonds into the deck surface with the same press process as standard transfers, so the finish lasts as long as the graphic itself.

    Pack: 30 sheets, 40×110mm. Press settings: https://www.bruhmfg.com/how-to-apply-fingerboard-heat-transfer/

    Add to cart
    New Hot
    Skateboard Heat transfer - BRUH Manufacturing
    Select options
    This product has multiple variants. The options may be chosen on the product page
    Quick view

    Skateboard Heat transfer

     Price range: $2.50 through $4.10

    Custom skateboard heat transfers manufactured by BRUH MFG — full-color graphics printed onto transparent PET release film, ready to be heat-pressed onto full-size skateboard decks. This is our real wear transfer: as you skate, the graphic wears down naturally to reveal the wood ply beneath, the same authentic wear pattern you see on pro shop […]

    Select options
    This product has multiple variants. The options may be chosen on the product page
    Fingerboard Gold Foil Heat Transfer - BRUH Manufacturing
    Add to cart
    Quick view

    Gold Foil Fingerboard Heat Transfer

     $12.00

    A classic gold mirror background for your fingerboard graphics. This 30-sheet pack layers behind any clear real wear heat transfer graphic, giving your artwork a rich metallic gold backdrop that catches the light as the board moves.

    Gold foil is the go-to finish for premium-looking decks — team boards, limited runs, and shop exclusives where the graphic needs to look expensive. It pairs especially well with dark artwork and bold logos.

    Each 40×110mm sheet is made to the ideal thickness for fingerboard application — no wrinkles, no lifting edges — and heat-bonds into the deck surface with the same press process as standard transfers, so the finish lasts as long as the graphic itself.

    Pack: 30 sheets, 40×110mm. Press settings: https://www.bruhmfg.com/how-to-apply-fingerboard-heat-transfer/

    Add to cart
    Fingerboard Holographic Foil Heat Transfer - BRUH Manufacturing
    Add to cart
    Quick view

    Holographic Foil Fingerboard Heat Transfer

     $15.00

    A rainbow prismatic background for your fingerboard graphics. This 30-sheet pack layers behind any clear real wear heat transfer graphic — the holographic finish shifts color as the viewing angle changes, turning even a simple graphic into a head-turner.

    Holographic is the loudest finish in the lineup: best for statement decks, contest boards, and drops designed to stand out in photos and videos. If the goal is attention, this is the pack.

    Each 40×110mm sheet is made to the ideal thickness for fingerboard application — no wrinkles, no lifting edges — and heat-bonds into the deck surface with the same press process as standard transfers, so the effect lasts as long as the graphic itself.

    Pack: 30 sheets, 40×110mm. Press settings: https://www.bruhmfg.com/how-to-apply-fingerboard-heat-transfer/

    Add to cart
    Custom Fingerboard Gang Sheet Builder - BRUH Manufacturing
    Add to cart
    Customize
    Quick view

    Custom Fingerboard Gang Sheet Builder

     $37.00

    Elevate your creativity with our Custom Fingerboard Gang Sheet Builder, designed to help you create vibrant, real wear fingerboard transfers tailored for multiple projects, all on a single sheet! With our builder, you can upload different-sized designs to fit various projects, from logos to full-size prints. Perfect for fingerboard companies, hobbyists, and creators, these custom fingerboard gang sheets let you arrange your designs as needed, saving time and reducing costs by fitting multiple prints on one sheet. Enjoy high-quality, long-lasting real wear transfers that adhere smoothly to your fingerboard decks.

    You can download the fingerboard design template to add your graphics in Adobe Photoshop or Illustrator. The recommended size for a single rectangle shape is 38 x 110mm. Submit print-ready artwork as a 300dpi PNG or PDF file at actual size without borders.

    Notes: Bruh MFG is not responsible for low-resolution or poor-quality prints resulting from the use of low-resolution design files uploaded. Please ensure your files meet the recommended specifications for optimal printing results.

    Add to cart
    Customize